广州南洋电缆有限公司——CQC+DEKRA电动汽车交流充电系统用电缆AC Charging EV Cable

无卤阻燃热塑性弹性体绝缘热塑性弹性护套电动汽车传导交流充电系统用电缆

Non-halogen flame retardantthermoplastic elastoplastic elastic sheath AC Charging EV Cable

标准Standard:CQC 1103~1105-2015、DEKRA K175-2、GB/T 33594-2017、TÜV 2PfG 1908

CQC证书号CQC Certificate No.:CQC17011172787

TÜV证书号TÜV Certificate No.:CH 50317687 0001、CH 50317692 0001、CH 50317694 0001

DEKRA证书号DEKRA Certificate No.：6004027.01DS

1.应用范围

本电缆铜导体、热塑性弹性体绝缘、热塑性弹性体内护套（需要时）、镀锡铜丝编织屏蔽（需要时）、热塑性弹性体护套组成。由于采用由第五类/第六类铜导体绞合而成，产品手感舒适，柔软耐弯折。选用无卤阻燃热塑性弹性体，其具有阻燃性能好、耐磨、耐碾压、耐酸碱、耐油、耐水、抗开裂、抗紫外线等优越性能。本电缆可应用干燥或潮湿环境中，适用于电动汽车充电桩，电动汽车充电枪等充电设备使用。阻燃性符合GB/T 18380.12-2008单根阻燃标准要求。

The cable is composed of copperconductor, thermoplastic elastomer insulation, thermoplastic elastomer innersheath(optional), tin-coated copper wire braid (optional) and thermoplastic elastomer sheath. The cable coulddemonstrate excellent flexibility with class 5 & class 6 copper conductor stranded, and excellent flame,abrasion, acid and alkali, oil, water, cracking,ultravoilet resistantcharacteristics performance due to halogenic free and flame-retardance  theromplastic elastomer material application.Thecable is applicable for both  dry or wetoccasion and designated for electric car charging pile, electric car charginggun use.Its flame chacteristic also could meet GB/T 18380.12-2008  standard requirement.

2.产品描述Product description

结构Construction/材质Material  

导体Conductor: 裸铜Bare copper

绝缘Insulation: TPE、XLPO  

填充Filler: PP绳PP Cord

包带Tape: 无纺布Non-woven fabrics

屏蔽Shielded: 镀锡铜Tinned Copper

护套Sheath: TPE、TPU、XLPO

成品颜色Color: 依客户要求Customer request  

3.电缆特性Features

额定温度Ratedtemperature: -40℃~+105℃

额定电压Rated Voltage: AC 450/750V

绝缘电阻Insulation Resistance: ≥0.037MΩ·km at 60℃

绝缘抗张强度Insulation Tensile Strength: ≥10N/ mm²

绝缘断裂伸长率Insulation Elongation: ≥300%

耐压试验Dielectric Volatge: 2.5kVac/15min,No Breakdown

护套抗张强度Sheath TensileStrength:  ≤4%

护套断裂伸长率Sheath Elongation: ≥300%

抗挤压Crush resistance: S≤4Sq≥4kN,4S≤35Sq≥11kN,S>35Sq≥15kN

护套热冲击Hot Shock: 150±2℃ 1h ，No cracks

低温冲击Low temperatureimpact:-40°C

抗撕裂强度Tearingresistance Tensile Strength: ≥20N/mm

耐酸碱Resistanceto Acid and alkali: 168h，Tensile Strength≤30%，Elongation≥100%

最小弯曲半径Min:Bending Radius: ≥6D

环保要求Environmental Requirements:ROHS and REACH